1994 Nissan Sentra 4-Door "signal light lit press brake" Questions

light and signal work, but brake light lights dont. I`ve replaced bulbs and fuse, still not working. Dwayne Hi, Dwayne!     Keep in mind that the brake lights are in a different circuit

...signal light indicator on the dash dimly lights up and flashes rapidly. If I make a left signal while the left signal dash indicator is lit (eg. I have pressed the brake pedal before signalling), the ...

...LIGHT? either a stop or turn signal or tail lights are out yes just have someone press the brake pedal while your standing behind it then just check the running lights by turning on the lights and ...

...signal the light will just stay lit and will not flash on and off. The turn signal shuts off properly at the end of a turn, it just does not flash. Could these two problems be related? you need to ...

...light up and stay lit. hazard lights don't work in rear and when in reverse turn signals stay lit and very dim to no reverse lights {: ) Looks like your lightings got haywired. Have you had ...

...signal light comes on when braking I have a 97 Toyota T100.  Just recently the right turn signal light comes on when I press on the brake pedal!?! The turning light doesn't flash when braking it ...

signal connector. Don't pull the connector apart, but back probe the connector with the test light probe. You know the color of the brake light wire from brake switch to the turn connector, so easy to

...signal problems. the left side works fine. the right works to, but flashes fast like there is a bulb out, but theres not, and it also makes the front left corner light flash as well. when i turn the ...

...signal won't lit when activate and my brake light also wont also but is illuminate. The Top Brake light do light up when press Check the fuses to the brake lights , All of the signal and tail lights ...

4runner left turn signal indicator is dimly lit when i press the brakes You have a bad ground, take the light out and see if there are ground wires at each bulb socket, these will get loose or corrode