key to start the car, it start no problem but there is a bang before it start, sound coming from the middle of the car( area of engine) could be a broken flywheel tooth or the starter is not set right
...flywheel key. The key is a small piece of metal used to locate the flywheel to the crank. if the flywheel nut is not to the right torque it can slip breaking the key and putting the ignition timing ...
and is biding to flywheel. Starter or flywheel teeth worn causing binding (not likely) Starter solenoid return spring broken. Ignition switch problem causing starter to stay powered after key released
...key and the car won't start. Thought it could be celinoid. BUT when I put in neutral and push the car back a foot or so, it connects and starts. Could it be a couple of teeth are broken on the ...
...solenoid spring in the starter is broken, not retracting the starter gear when the key is released. The starter gear is binding in the flywheel (flex plate) and not releasing after releasing the
...flywheel or shaft is worn it may cause misfiring, hard starting or starter rope kickback. You might try a new key in the key-way on the shaft. Also try a new plug, many times a new spark plug will ...
Question about Nissan Sentra
...key is turned it hesitates, makes a clunck then engages the engine, replaced starter it has happened again. The ignition coil can't do what you describe. It almost sounds as if you have some broken ...
...flywheel problem. When u turn the key to start the car, the starter gear engages w/ the flywheel, turning the flywheel, which turns the engine over. It sounds like the teeth of the flywheel and ...
Question about Cars & Trucks
...flywheel screeches until turning key back to certain spot when turning ignition there is no resistance yet motor starts and then any point past this causes the flywheel to screech.I am able to gently ...
...key to start the ignition with the grinding sound.The people at the autozone tested it and say,"the alternator and stater are still good.Bought a new battery.What is causing the grinding sound ...
373 questions posted
Usually answered in minutes!
798 Questions
708 Questions
716 Questions
570 Questions
508 Questions