...Test the Starter Motor (Nissan 1.6L, 1.8L). No Start Condition BasicsThe most basic and the most important thing you need to know, to begin troubleshooting the No Start Condition, is that your Nissan ...
...1 -How to Test the Ignition COP Coils (Nissan 1.8L) troubleshootmyvehicle.com > Nissan > 1.8L Feb 12, 2013 - What Tools Do I Need to Test the COP Coils. ... coils (most commonly known as the COP ...
not you probably need a distributor or ignition coil. The last thing to test if everthing was OK is to do a compression test on 1 cylinder to make sure you have adequate compression 100 pounds usually
1. Perform "Accelerator Pedal Released Position Learning". a. Make sure that accelerator pedal is fully released. b. Turn ignition switch 'ON' and wait at least 2 seconds. c. Turn ignition switch 'OFF
Question about Nissan Sentra
...test on # 2 cylinder . Not a MAF sensor , would affect just 1 cylinder . Engine mechanical problem ,maybe . Take it to a qualified repair shop , rather then guessing . Not sure if the crank sensor or ...
1: Anytime you have a problem with electronically controlled components such as an engine, transmission, ABS brake, or SRS (supplemental restraint system, Air Bag) inspect all fuses using a test light
1: Anytime you have a problem with electronically controlled components such as an engine, transmission, ABS brake, or SRS (supplemental restraint system, Air Bag) inspect all fuses using a test light
Question about Nissan Sentra
...1.When a starter fails to start a vehicle, and the wiring has been found to be bad, and changed, one suspects the wiring first. 2.If a starter is suspected to be bad, one takes it out, and performs a ...
Question about Nissan Sentra
...1 ,Take off tappet covet then one by one check tappets & check 2nd cylinder (or which is doing missing) tappet, Then adjust it & Make sure check all of them & adjust by manual book of ...
373 questions posted
Usually answered in minutes!
798 Questions
708 Questions
716 Questions
570 Questions
508 Questions