1994 Nissan Pickup "remove engine" Questions

...engine: Remove the front gravel shield. Detach the oil pressure switch connector. Drain the engine oil and remove the oil filter. CAUTION The EPA warns that prolonged contact with used engine oil may ...

...to lift engine for enough clearance to remove oil pan? No, should have enough room to slide it out ,if not disconnect the engine mounts and jack up or lift up the engine just enough to slide the

...remove the engine bully key grove that key should be top side while you rotating the engine there is mark like -- on the cover behand where you remove the pully so that mark and the crank shark key ...

...remove the engine from my 86 Nissan 4x4 truck? 24Z engine. What do I have to do to get the engine out so I can rebuild it? hi,I have a 85 nissan 720 4x4,had it for over 20 years,here's a link to the ...

remove the engine accessory drive belts. Remove the cooling fan assembly and the water pump pulley. Drain the fluid from the power steering reservoir. Unbolt and remove the power steering pump. Unbolt

...Remove the or disconnect the following: Negative battery cable Engine under cover Starter harness connectors Starter motor To install: Install or connect the following: Starter motor. Tighten the ...

...on a 87 toy 4x4 the bolts are removed , belt removed, wires removed, but I cant get it out from engine. I've tried every angle thinkable. You need to remove the lower radiator hose and the

...engine, there should be 2 or 3 bolts to remove to take the hose connection off the engine. The thermostat goes in between the hose connection and the engine. If there isn't a thermostat there then I ...

...remove lock bolts before starting engine,i am a qualified diesel mechanic that had the misfortune to work on these rubbish engines on a daily basis in 2008 Dear, i would like to know,how can I remove ...

...engine oil filter. The best way to change it is to go thru the wheel well. Take off the passenger front wheel, lift or remove the rubber splash curtain, remove the oil filter, disconnect the rubber ...