1992 Nissan Sentra 4 Door "truck wont turn right sharp" Questions

...WONT STAY RUNNING LONG was getting on freeway and turn the cornor sharp and camaro started to die like it was trying to shut off i pulled over turned it off then try'd to start it and nuthin just ...

...turn and the car died it started right back up but runs extreamly ruff and most times wont stay running. pulled trouble codes 12 21 and 52 the 52 is an older code as far as i know the other codes are ...

...truck idles low stalls out sometimes and wont go in to reverse right away i have to wait a minute or i hear a grinding noise i know it sounds like a lot is wrong but i want to fix it up and make it a ...

...turn right it will pull out farenoff to make it grind but it wont let it slip. so let me know Sounds like the Hub bearings are bad. These are located behind the wheel after taking off the break ...

...turn flash.if i dont put pressure on lever light stays on but wont flash It's time to replace the blinker switch. You don't say what year it is but it's not a real hard job. Remove the ...

...truck and would like to keep it, then i would fix it. you wont get much for it with the diff crook,and fixing a diff is a lot cheaper than buying a another vehicle and who knows how long a replacment ...

...wont start most likely a bad fuel pump, do you hear it hum when the key is on? fuel pump has to pump 180 pounds of pressure to operatethe motor, some pumps do come on but don't pump enough pressure ...

...wont turn off I am carrying a small kitchen knife with me. I press the switch and then use the sharp end of the knife to pull the switch button in the right position. This problem of the switch is ...

wont cook. I have vacumn the vents and took a lot of dust out I didn't unscrew not sure about that part. Is it dead or can it be saved If you wish to get some details; visit the site linked here. Pull

...wont turn over. It has a brand new battery. I had a similar problem a month ago and a mechanic said I just needed a new battery. He recommended I replace my battery terminals which were old and some ...