1990 Nissan Pulsar "replace belt motor" Questions

...seat belt drivers seat has no tilt adjustment. the rotating knob is manually operated, no electric motor. tilt adjustment knob freewheels. Pull the knob off and look inside, it is likely ground

...motor 1.6, has no spark to coil i drove car to train station, when i got back the car would not start, replaced coil, distributor, ecu box, all fuesible links, plugs & plug leads, fuel pump is ...

replace the serpentine belt for power window on 2003 dodge durango The motor works on the driver side window but the belt comes off. Can I just replace the serpentine belt without replacing both motor

...replace the belt, and often the idler pulley, because the pulley tends to wear out at the same time. Click here for a belt installation diagram Motor If the dryer motor only hums when you press the ...

...shaft belt damage the motor or will replaceing the belt fix the noise? You sould replace the belt along with the timing belt. If it gets caught in the timing belt you will have MAJOR EGINE

...mount must come off to replace the serpentine belt on the 3.0 6 cylinder motors. Not as daunting a task as it may seem, just requires a jack and block of wood under the oil pan to support the

...belt Replace the belts on cars that do not have interference motors. If your car does have this motor, consider other things that may have broken when the timing belt broke or stretched. Your car ...

...The rear engine mount may have leaked oil onto the belt , check if there is oil on the belt ,with the engine stopped wipe under the belt with a tissue if clear replace belt ,best done by a

...valves if the belt breaks. That is why they tell you to replace the timing belt before too long. Also if motor is interference fit when you try and turn crank go slow because you may bump into

...replace my drive belt do i have to disconnect motor mount to replace my serpentine belt on my 1995 pontiac bonniville v6 3800 Depends on the motor. If there is a mount on the passanger side that the ...