...wheel drive? And does it have U-joints? It as constant velocity joints which are the front axles. Have a trusted person in the car, running and in park. Watch under the hood as the shift from neutral ...
Need info on replacing the front wheel bearings on my front wheel drive 1985 Nissan Stanza? WOW...85? Go to AutoZone or Napa and order a Chiltons manual ($25)... Good Luck getting parts
...wheel drive cars.. Remove the wheel Remove the brake caliper Remove the brake rotor Remove the spindle nut Remove the wheel bearing assembly (usually 3 bolts) -The next step may be optional, depends ...
Question about Nissan Stanza
...wheel hub with disc brake rotor from spindle with bearings installed. Remove the outer bearing from the hub. Remove inner bearing and grease seal from hub using long brass drift pin or equivalent. If ...
...wheel knuckle and press it out from the rear. Yeah, the knuckle, remove the strut tower bolts, drive train ( which can be lighty pressed out ), caliper and bracket, and remove the ball joint. There's ...
4 wheel drive does not work, it works when it is hot out but not when it is cold check the fluid level in your transfer case
I was starting off from a corner when my Nissan Pintara stopped getting power to the wheels. The transmission(automatic) just stopped putting out power. I have no drive in any range. The fluid is OK. ...
...wheel drive. The problem is with the transmission. On the side facing the radiator towards the back on top of the side is a round something like 3" cover or seal or something that is gushing fluid ...
wheel 21 mm., & tie rod (Figure 3), axle cap, cotter pin, adj-nut & rubber washer. Remove ball joint nuts 17 mm., left lower control arm 19mm. & swaybar bracket 14 mm. (Fig 2). Remove axle
23 questions posted
Usually answered in minutes!
125 Questions
80 Questions
65 Questions
48 Questions
21 Questions