1985 Nissan Pickup "cluth fluid" Questions

Clutch problem. Getting truck to start is getting harder. Where or is there clutch fluid? manual gearbox clutch reservoir under hood far side of cluth pedal

cluth has to be on floor to shift your truck has a hydraulic clutch, which has a master cylinder next to the brake master cylinder. Check the fluid level. If it is low or empty, you have a leak in the

cluth sticking to floor.would have to pull clutch pedal back up with foot. truck would stick in gear. even with clutch fully depressed. seemed like spring had disconnected from clutch pedal. now while

...cluth won't disengage depends on what type of clutch meaning with or without slave cylinder. if with, slave cylinder could be bad or out of fluid. if without, throwout bearing and possibly ...

...cluth fluid and it is fine. It will start fine but i cannot put it in gear when it is started. Please help sound like your clutch master cyl is bad. when you push the clutch how does it feel? real ...

cluth want get tight Great spelling!!! Check your clutch master cylinder fluid level. (Dot 3 brake fluid) It may be leaking at the clutch master cylinder or the slave cylinder. If the fluid looks dark

...cluth is in the engean yes the clutch is well u have to take the gear box out and the clutch is on the back of the engine now the cable runs from the pedel to the gear box if u look u will see a blck ...

cluth peddel does not retract after you let your foot off it The slave cylinder has failed leaving no fluid in the line. Check the clutch master cylinder as well for low fluid, they often leak too.

...cluth fluid fill? I asked this fluid fill question for hydralic clutch for a 1969 f600 dump truck. please help! didn't think something that old had a hydro clutch but some clutches sare the res ...

fluid effect the cluth Absolutely Not, the fluid in the clutch master cylinder will affect the clutch if it's low, check it to be sure it's full. If it's leaking either it or the clutch slave cylinder