2004 Mazda Tribute "causes 6 miss" Questions

...6 cylinder. Potential causes. Which cylinder is 6? The #6 cylinder is the last cylinder on the right side while you stand in front of the vehicle. Firing order is 1 - 6 - 5 - 4 - 3 - 2. Potential ...

6 plugs changed, coil pack on 4 changed, both crank sensors changed, coolant sensor changed and it still is running bad. Please help me a bad injector can cause a miss, you can listen to each injector

...6 cly to miss ! As I said, New plug, new wire, fore on coil pac, What else can be causing it to miss on #6 Cly ? Somebody help me ... Please Thank you HELP !!! ...

...6 cylinder engine, has a miss all the time. idle to 4000 rpm, some days it is worse than others. rebuilt carb, new plugs , wires dist cap and roter button, new ignition module new coil. checked all ...

...miss firing at cylinder # 6 (P0306). Replaced cap, wires & plugs (all AC Delco). It's still miss firing, what could be causing this? Here's a link about your code P0306. P0306 OBD II Trouble ...

6 cyl my hold button came on display then after that it seems to have a miss only under load from trans. i have had disributor repalced as the ignitor was burnt and would not sart. I have replaced all

...MISS FIRIENG ON ALL 6 CYL. I HAVE A 1996 JEEP GRAND CHEROKEE TOOK IT TO AUTOZONE AND HAD THE CHECK ENGINE CODE RAN THEY SAID IT WAS MISSING ON ALL 6 CYL. DONT UNDERSTAND WHY CAUSE I STILL DRIVE IT ...

...6 plugs. The code it was spitting out read that cylinders 1&2 are miss firing. If your 96 E250 300ci was running perfectly and then started missing and the code is indicating a miss fire in cylinders ...

...miss fireing. I have replaced the wires and the plugs. Iwas told that it is probably a valve that went bad. Can you still drive with it in this condition? its not recommended to drive a vehicle with ...

what is an error 306 Code P306 is for a miss fire on cylinder number 6. It could be caused by a spark plug or injector issue.