2003 Mazda Protege "timing belt alignment marks" Questions

timing belt is installed and the tensioner is set, rotate the crankshaft 2 full turns to verify proper alignment. If all the marks do not line up after turning the crankshaft, then you must remove the

...timing belt starting from the crankshaft gear, then right cam, then left cam, and at last the timing bearing. 7. Press and hold the timing belt to keep it firm on the gears and loosen the timing ...

timing belt has not been removed or has skipped. If the belt is removed or skipped this is an interference engine, valves and or pistons could be damaged by turning crankshaft, seek professional help.

...timing belt on my 2003 Mazda Protege and I lined up the timing marks on the overhead cams and the crankshaft timing marks. When I started it the engine made a horrible tinging sound so I shutdown ...

...timing belt. When the #1 cylinder is at top dead center and the camshaft marks are aligned, should both camshafts NOT be pushing slightly on any valve but have all the valves closed? This seems to be ...

timing belt are usually caused by worn timing belt teeth and resetting it is usually done by changing the belt. on new car there is no more timing adjustment the computer does all the required change.

...timing belt,now he thinks the belt is set off the mark,??need help asap,need to reset the cam and crank the the correct marks.Thanks ...

...timing belt cover. 2. u need to loosen the crank bolt with am impact wrench, or secure the flywheel and lossen the crank bolt .3. u need a 10mm short 1/4 inch socket/or wrench inch to loosen the (4) ...

...do you reset timing after replacing timing belt If the timing marks were correctly aligned with the new belt installation then no further adjustments should be necessary, the pcm adjusts the

...timing belt car will now turn over but want stay crank You have to align the timing marks on the timing gears. You should go to a parts store and purchase a haynes repair manual they cost about ...