2003 Mazda Protege "replace back wheel bearings" Questions

back to the shop. They may have got a wheel sensor misadjusted or not connected. They did the brake job, they are responsible to do the job right before letting it go out the door. I hope they do take

...replace the wheel bearing and I dis-connected the abs sys at the hub and now the abs light is on. How do i clear the error and make the light go off. you can take it to a nearby aftermarket parts ...

...back to front. usaly anything over 10-20 thouthands of an inch is bad, and that mean if you feel it it's bad. but anyways to replace it you will need a sop, you have to compress your front srping in ...

...back in as it was only a year old. It almost feels like the drive wheels are not acting together when driving.Possible solution would be greatly appreciated.Thanks Bill I would check the sway bar ...

...replace the front wheel bearing on 2009 Sonata? Is there a retaining ring at the back of the steering knuckle? Can I remove the old bearing with a slide hammer without taking the knuckle off? No way ...

...wheel bearing/hub. Caution: These fasteners MUST be replaced with new fasteners anytime they become loose or are removed. Failure to replace these fasteners after they become loose or are removed may ...

...back wheel seal--coat the axle shaft with grease lightly, thing coat-----install wheel hub on to axle shaft...be careful here don't damage the rear hub seal------------insert front race ...

back tires? Are my wheel bearing bad? Yes , your wheel bearings are bad !!!!!! Yes,your rear bearing assembling needs replacing,here's a link on a new part. Wheel Bearing Hub Assembly Rear at AutoZone

...replace it please help!!! wheel off remove the tin cap in the centure of the hub undo the big nut put the wheel back on with just 2 bolts finger tight so you can pull the hub off.once the hub is off ...

...back together and now the wheel wobbles while it is on the jack.. bout an inch and a half wobble back and forth The bearing is a tapered bearing did you put it on the right way round so that the ...