2003 Mazda Protege "2 lock doors" Questions

...2: Lock and unlock the drivers door using the power door lock switch on the door. Step 3: Insert key into the ignition. Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON ...

...lock or open with remote. The others work fine. What is the problem? I just fixed 2 of these on my son's car. We got 2 used operators from the pull-a-part auto wreck yard. We actually had the ones ...

...lock and door mechanism, they have little plastic clips that break easily , once those are unhooked, take out the 2 mounting bolts that hold the handle on,, , again, use car and be sure and watch the ...

2 serial data circuits. If the RIM determines that a lock or unlock function is permitted, it sends a class 2 message back to the individual door modules commanding them to perform that Lock or Unlock

lock after 2 seconds. Perform all of following methods within 20 seconds: Unlock driver door lock knob. Close and open driver door 2 times. Lock and unlock driver door lock knob. After performing this

...inside the door panel that control that is probably bad or shorting out causing the doors to lock . You can also hold the key 2 the lock position for a few seconds  and lock all the ...

...lock receiver (RCDLR) ?€¢ The power door serial data circuit ?€¢ The class 2 serial data circuit ?€¢ The DRVMDL Fuse - 10 amp ?€¢ The PDM Fuse - 10 amp ?€¢ The RRINMDL Fuse - 10 a Class 2 and Power ...

...the sliding side door. 2. Slide the child lock control outward (away from the vehicle) to disengage the Child Protection Door Lock. 3. Repeat Steps 1 and 2 on the opposite sliding door (if

...lock motors receive the Class 2 message and activate the motor in the appropriate direction to lock or unlock the vehicle's doors and liftgate. The rear door lock switch provides a lock and unlock ...

...lock/unlock switch 2. Encoder and limit switch 1. Check main power window and door lock/unlock switch. 2. Check encoder and limit switch. Refer to GW-31, "Encoder and Limit Switch Check (Front LH)" . ...