...reset the factory alarm. the alarm is on when you try to start the car try the spare key and problem is still the smae then its a dealer only job to set it all up again .sorry no quick fix with this ...
...reset switch for the factory alarm for a 1997-1998 ford contour. or if possiable another way to reset it, because the clicker for the car was misplaced or lost. the only way to reset an alarm is to ...
...reset. HELP If it is the factory system that needs to be reset, unfortunately you will need a Ford IDS, which most large shops have or your local Ford dealer. If it is the aftermarket alarm system ...
...reset the factory alarm. to disable the factory alarm for good in the drivers door wireing harness look for the factory alarm disarm wire it should be dark green/purple with a negative polarity when ...
...reset it? I disconnected the battery and it still does not work. Have you tried unlocking the drivers door with the key? This is a common way to re-set a factory alarm system. If you have an ...
reset buttons. Now, I don't hear the confirmation horn when the alarm is set when I lock the van. Any suggestions. This is a conversion van with, what appears to be, a factory alarm. Thanks in advance
Question about Mazda 626
...factory alarm on my 96 ford explore the alarm has to be reset every time i start it if fine the fuse for the alarm, remove the fuse, see if it will start and then shut it off, than replace the fuse. ...
...System Reset?
...reset it? CAR ALARM ISSUES It can be any of the car doors not got properly locked or the door is locked but the switch is not sensing the door locked. Open and close each door again properly. Or else ...
...factory when you put key in ignition and turn on will reset alarm --you can buy key fobs for a few dollars online and program for free --and unlocking door with key is what sets off alarm you have a ...
305 questions posted
Usually answered in minutes!
544 Questions
410 Questions
356 Questions
269 Questions
277 Questions