2000 Mazda MX-5 Miata "protege 1 engine" Questions

...1/4 way down on the acclerator. She started and feathered the gas til she was fully operational. Let her stay on for about 10 minutes then took her out for a good long spirited drive. I had the same ...

...Protege, no manual. Is there some way to reset the internal computer? Engine light was on and replaced O2 sensor. Emissions test shows O2 sensor not ready. there are more then 1 o2 sensor find out if ...

protege, need front engine mount, do i need to get two or get 1 front and then 1 for right side near passenger side? new to auto repairs lol. i would replace all the mounts at the same time. it's good

...Protege from scratch With out distributor in set engine to TDC top dead center, then set your distributor to #1 cyl one on top closest to front of car, and insert with a slight turn make ...

...Protege is the engine spark plug coils and wires, so check the condition and operation of these first.With this problem the engine will lag greatest of all when starting from cold and when going ...

need firing order 1996 mazda protege 1-3-4-2 regardless of whether it's the 1.5 or 1.8 engine. http://autorepair.about.com/library/firing_orders/bl-mazda-firing-96.htm

2003 Mazda protege fuel pump relay location See page 1: http://www.mazdaspd.com/manual_files/09-21.pdf Should be in the fuse box in the engine compartment. Check your owners manual for details.

...protege 94 step 1 17-19 ft/lb step 2 90 degrees step 3 additional 90 degrees engine uses Torque To Yield head bolts New head bolts must be used when cylinder head is replaced or re-installed stockam ...

...Protege-Engine Light-Cylinder 2 Check engine light and brake light is now on. Was advised it's the cylinder #2 misfiring which is a result of the engine going out. Any other thoughts? I would change ...

...the firing order for an 95 Mazda protege 1.8 Typically 1-3-4-2 on most Mazda I4 engines, Cylinder #1 is toward the front of the engine with the accessory belts and stuff. (not the transmission