tail light on my 2000 S10 does not work The brake light and blinker work and the bulb and socket has been replaced but the tail light will not work must be the switch on the pedal
...bulbs Usually in any passanger vehicle you will find in the trunk if you lift up the carpet by the tail light there will be a couple speed nuts or sum kind of bolt and nut holding on the tail light. ...
no tail or inside lights. Headlights, brakelights, and turn lights work. blown fuse on the tail light circuit
...tail or stop lights working 1989 626t i have no tail or stop light in my 1989 626 5door but when you push the break pedal the door light comes on Tha't's a good one, I say there is a section in the ...
...a different circuit. Check the bulb sockets closely for corrosion. Failing this check connectors for the tail lights for possible water penetration, or loose connections. Hope this ia of some help ...
...Have you checked the fuses, usuall the tail lights are on there own fuse. fuse or wire harness, checked the voltage present in the fittings? Switch on before checking. you get 12 volts more or
tail lights shut off When i have my lights on my rear lights turn off when i use turn signal or brake, turn signal also turns off dash lights. when its day time the brake lights dont work.... all ...
...tail lights and hud lights are out after a blow out on the left rear tire took out the marker light head lights and break lights still work i need to find the fuse to check it Try just going through ...
...Tail lights, turn signals work; the fuse works, the cruise & horn are on the same fuse. I have tracked it to the brakes only so what I need is a wiring diagram and know what color wire I am tracing; ...
...tail lights are not working. Head lights, signals, brake lights do work. Had problem a few months back and took to the repair shot and they said blown bulb was problem. But now I have the problem ...
822 questions posted
Usually answered in minutes!
410 Questions
356 Questions
269 Questions
277 Questions
227 Questions