1999 Mazda 626 "spark 2 plug" Questions

Ad

Question about Mazda 626

1 Answer

...2 electrical does it have electrical spark to plugs crank engine with a spark plug connected to spark plug wire laying plug on engine can you see spark? No test ignition coil wires with a logic probe ...

Ad

...are 2 months old. i took out the spark plugs and they are all lack at the tip. in cylinder #3 there is some oil on the spark plug you have to fix your engine,, replace valve seals and piston ...

Ad

Question about Mazda 626

1 Answer

...spark plugs r in the 1-3-4-2 order and it turns over but won't start any suggestions? check the ignition coil power source...get a test light & check for power with the key on @ the positive side of ...

Question about Mazda 626

1 Answer

...2 weeks ago, my car was jerking on the highway..So that very next day..It was running about 20 minute and it cut off all of sudden..I try to start it and it starts up just fine..10 mins driving ...

...2) A bad crankshaft position (CKP) sensor or broken, loose or corroded wires from the sensor to the PCM. 3) A bad ignition module or A bad ignition coil . 4) A bad rotor or distributor cap (cracks or ...

...2 cylinders would not work, the spark is controlled by the computerif its been 30,000 or sole miles since plugs and wires were changed change them it might fix it but at least you will know it isnt ...

...spark plugs replaced 2 years ago were not the correct ones and one had even gone bad. So the spark plugs may be the problem. Be sure to use the recommended ones by the recommended manufacturer. Look ...

spark plug wire diagram position from distributor to engine on mazda 626 4 cylendar For the 1996 Mazda 626 2.0L DOHC In-Line 4-Cylinder: Firing Order: 1 - 3 - 4 - 2 Cylinders: .........(back).........

Question about Mazda 626

1 Answer

...2-3 days even when they are newly changed Get a botle of spark. Spray plugs and al your electrical conectors and try again. I think your problem will be solved. If the plugs getting dirty like burned ...

spark plugs wires order on mazda 626 V6 1997 1 3 5 2 4 6 (Front of engine) The distributor has the #1 cylinder's wire marked. The rotation is counter-clockwise and goes: 1-2-3-5-4-6 i hope this helps

Not finding what you are looking for?
1999 Mazda 626 Logo

822 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Mazda 626
2000 Mazda 626

410 Questions

1998 Mazda 626
1998 Mazda 626

356 Questions

1995 Mazda 626
1995 Mazda 626

269 Questions

1997 Mazda 626
1997 Mazda 626

277 Questions

2001 Mazda 626
2001 Mazda 626

227 Questions

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...