1999 Mazda 626 "fork rebuild" Questions

...the gear shift. What could be wrong? You're 5th gear syncro has just gone out. It keeps your shift forks and slider gear from popping off. It also makes it possible to shift the gear in. It's going ...

fork or synchronizers are gone out.. Probably have to rebuild your tyranny.. They have rebuild kits on eBay.. For somewhere between 150. Or more sorry for the bad news Sounds like a failure of the 1st

...or just part of being out of line because of the shifting fork. The forks can be removed fairly easily and straightened, hopefully the grinding will stop, if not then a rebuild would be next in

3rd, 4th, and 5th gear went out in my transmission can I just get a new gear box or forks to fix it My car started out without 3rd when I bought it I was told it was a linkage issue but then later ...

i lost my 5th and revers gears in my tranny Time for a rebuild on the tranny, one of the shift forks has broken. Only other thing it could be is linkage being way out of adjustment.

car not staying in 5th gear the synchronizer is bad not alowing the forks to keep in fifth gear it is probably cheaper to rebuild it than it is to buy a new one still over 1000 easy

5 speed want go in gear 5 speed want go all the way in gear ,then i put it in revirse it started moving forward YOU HAVE A BROKEN SHIFT FORK YOU NEED A REBUILD

...getting back in. Shifts fine from 2 to 3 In any manual tranny, this is caused by worn shift forks, synchros, gear face dogs/ledges or any combination of these. Rebuild is in order

my ae100 corolla goes to neutral in drive mode when i over acelerate but when i dont acelerate hard gears shift well, what could be the problem. ? Worn gear selector forks. Time for a new car or ...

...seen a similar issue on other transmissions where the shifter slips out of the slots in the shift forks, either due to shifter bushing wear or just general wear on tte trans. It can usually be ...