1998 Mazda 626 "2 fuel pump switch" Questions

Ad

Question about Mazda 626

2 Answers

...2 to 5 minutes and then it will start again. A common time this will happen will be when the car is cold, it's wet outside, or low on gas. Any ideas? Ah, you give many very good clues, all of ...

Ad

...light on for 2 years Replaced fuel pump, battery, alternator, alternator belt, interior light will not work have light cked and repair problem interior light could be fuse switchs or light its

Ad

...fuel quality, and electrical connections. Are all items okay?Yes - Go to next stepNo - Service as required.2. Check for stored OBD-II error codes. Are there any stored codes?Yes - Go to appropriate ...

Question about Mazda 626

2 Answers

...2. If the fan runs, with the jumpers but not when connected, the fan relay is the most likely problem. 3. If fan operates but a high current draw is suspected continue with the following ammeter ...

...fuel pump and so it works fine and back to normal and good as new. hi, if i can offer another solution, do you have air conditioning in the car? was it on while this problem is going on? a/c has this ...

...2 to 3 seconds. fuel 97 k2500 chevy 4wd.Car starts and cuts out after 2 to 3 seconds. fuel presuer ok. checked injectors, sprays for 3 seconds and stops. When the ignition switch is turned on the pcm ...

...2. Pinch fuel feed hose (2) with two fingers. 1 : Air cleaner assembly Fuel pressure pulsation should be felt on the fuel feed hose for 1 second after ignition switch is turned ON. Is the inspection ...

fuel pump 2002 ranger, also the 2 pins for the sensor. can you should a picture. truck won't start, turns over good. starts with starting flud. Two of those wires are for the sending unit for the fuel

...2 cables with a washer between the cables. they come loose all the time. check fuel pump relay locators  located below or behind glove compartment, remove panel. check , oil pressure fuel ...

...2. Check the fuel system for leaks. 3. If no fuel leak is apparent, reset the fuel pump shut-off switch by pushing in on the reset button. 4. Turn the ignition to the RUN position. Pause for a few ...

Not finding what you are looking for?
1998 Mazda 626 Logo

544 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Mazda 626
1999 Mazda 626

544 Questions

2000 Mazda 626
2000 Mazda 626

410 Questions

1995 Mazda 626
1995 Mazda 626

269 Questions

1997 Mazda 626
1997 Mazda 626

277 Questions

2001 Mazda 626
2001 Mazda 626

227 Questions

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...