1997 Mazda 626 "crank" Questions

coolant leak at crank pulley I have a 1994 Lantis or Astina 2L V6 that has a bad coolant leak that occurs at the crank pulley...........what could this problem be? it is not the crank pulley it is the

reduced arc, wipers. Park in center of glass. I mistakenly removed the wiper motor output crank from the motor shaft while changing out the motor. Now I don't know how to re-set the position of the ...

what will cause the car not to crank? Car won't crank Bad starter or bad starter relay will prevent it from cranking.

car cranks but will not start i have replaced fuel pump,spark plugs and wires This could go several ways #1 engine mechanical check cranking compression should have 125 psi or greater in all cylinders

looking for the location of crank shaft on 2000 mazda 626 looking for location of crank shaft for 2000 mazda 626 i assume you mean crank shaft sensor ,if its not on the front puilley then look around ...

Brake piston I was changing my brakes and I had to manually crank my piston in to be flush with the caliper. I couldn't get it in any farther so I tried to crank it to it's original position and now ...

99 mazda 626 cut out and won't restart has spark and fuel Hi the car stalled then would restart cranks but no start iv checked spark fuel and injector pulse all ok not sure what to do from here please

my mazda 626 will crank over but will not start i think someone took a fuse out it will crank over but will not start i'm thinking a ex girlfriend took a fuse out but dont know where to look ...

I just put a new alternator in my 1994 Mazda 626 and it will not crank alternators only provide current to any operating system,,,starter is what cranks motor over

...is bad. The easiest way to check which is at fault is to look at the dash lights when you go to crank it over. If when you crank it over the dash lights dim slightly, then that tells you that it ...