1995 Mazda MX-6 "rotor" Questions

i just fitted a new rotor arm and distributor cap to my mazda 2.5 v6 mx6. now it wont start up. i have put my old rotor arm and cap back on but the problem is still there. ignition coil may be ...

1992 gen 1 mx6 mazda 6cyl.hesitation ,misfire,flatspot.replaced plugs,leads,rotor cap,fuel filter etc Probably gunk or carbon build-up. See if Seafoam works for you, do a full engine treatment. You ...

...instruction. but no luck. I marked the body to a loction of the engine and the position of the rotor. make sure all the HT leads are in the right ...

...pads need replaced. Here is my confusion. I was looking at the top of a large metal piece that the rotor/wheel disc? mounts on to and the metal is rusted and can be broken apart by hand. I thought ...

...on the clutch and driving is jerky. I just changed the fuel filter, spark plugs, wires, cap and rotor, and air filter; and double checked the spark plug gap so what would cause that? mass air

likely ready for a tuneup that would include new 1. Spark plugs 2. Spark plug wires 3. ignition cap/rotor, if used 4. new serpentine belt(s) 5. Fuel system cleaner such as Chevron Techron or Regane 6.

...to idle rough.  It could be faulty ignition parts like spark plugs, distributor cap, ignition rotor, ignition wires, coil, worn distributor shaft, bad ignitor, etc.  It could also be ...

...2l turbo manual wont start have put new fuel filter and pump, which were checked today, new cap and rotor,wires, plugs, recently a new clutch . this problem accured when i replaced # 2 & 4 motor ...

I can't get the distributor rotor back on. Aftermarket part. Mazda part ordered, but I'm thinking of a new distributor. Any ideas? Sounds like you may just have the wrong part. I'd get your money back

...turbo wont kick in What type of Mazda, Turbos that wont spin up can be seized, have broken vanes/rotor shafts, stuck open wastegates. Visually inspect the turbo, if it has a waste-gate lever you ...