...the car at night or in a dark garage and check to see that none of the wires are raking. BAD SPARK PLUGS AND WIRES WILL MAKE YOUR CAR HARD TO START.ALSO MAKE CAR MISFIRE RUN ROUGH.ENGINE WILL
misfire under load my hold button came on display then after that it seems to have a miss only under load from trans. i have had disributor repalced as the ignitor was burnt and would not sart. I have
My MX6 won't start.i have checked for fire at the plugs if you take out the plugs spin it over without any plugs then you put in brand new ones it will fire up and start.It seems to get flooded.The ...
i changed the plugs and the car started skipping so i changed the plug wires and at first it didn't skip now it is, im thinking i either got the firing order wrong or the feul filter needs changing If
timing setting for a automatic mazda mx6 92 what is the timing setting for a automatic mazda mx6 92 model? The non-turbo 2.2 Liter engine? 6 Degrees. Should be on your Emissions label under the hood.
...the wires right out of the plug and no way to know the order agin this is the 6 wire plug that plugs into the distributor This solution will help you greatly: ...
1991 mx6 misses after warm. replaced dist, rotor,fuel filter and air filter.plugs are white and gaped right.know another check? do a compression test,did you replace wires and plugs? you need to ...
...repalced the gaskets and plugged everything up to where they go. i also bought new spark plugs, plug wires,distributor cap and rotor. we got the car to idle normal with all cylinders.5/6 ...
to run rough or miss. It is possible that you may have rubbed through wires, cracked coils, cracked plugs. Also checked plugs for carbon tracking
106 questions posted
Usually answered in minutes!
132 Questions
87 Questions
59 Questions
40 Questions
20 Questions