2004 GMC Yukon "low pressure port" Questions

...low pressure ac port located? it is either in the larger of the two ac hodes or in the round can that is called the receiver dryer, that is near the rear of engine compartment, the low side (larger ...

pressure regulator, pump selanoide. Still spraying streams of fuel. Will not start unless fuel shut off and then will only idle on one injector with other unplugged. Showing code 54 fuel circuit error

...pressure hose. You connect the can to the hose, then to the A/C filler input (located on the A/C silver hose at left from you). Then you incline the can just a little bit to let the gazes exits. But ...

pipe nozzle over and behind the compressor.  The thinner pipe is the high pressure side. Do NOT try to charge from that port.  On my 99 Yukon the low side is just behind the compressor. 

low pressure port on a '08 town and country LX V6 Flex fuel? trying to recharge a/c ..i found two dust caps, but unable to identify low port. the low pressure port is always the smaller fitting on the

...low pressure and one for high pressure. the low pressure is bigger in diameter and is usually close to the dryer and or fender and firewall. the high pressure is near the condensor on the fron of the ...

...low pressure port location 2004 chevorlet avalanch looking for location of ac low pressure port location to add 134a refridgerant Look back on the firewall for the two a/c lines. One is large and on ...

low pressure port? for a 2002 mercury cougar where is the low pressure port on this car? THANKS RT. FRT. inner fender....GL Follow the tubing from the condenser to the compressor and you will find the

...low pressure port is and the caps are not marked with L or H. Help! Thank you. The good news is a that vehicle has R134A which means the quick release from your refill can will only fit the low ...

...low pressure port? what appeares to be the low pressure port in the engin compartment ,close to the Hi pressure port will not accept the push on refill hose, could the low pressure port be in back by ...