2004 GMC Yukon "error code" Questions

...test. The PCM's memory checksum test is performed regularly.Oct 27, 2023 P0601 Code: Internal Control Module Memory Checksum Error CarParts.com https://www.carparts.com > ... > OBD-II Trouble Codes

...liftgate fuse error code "Replace liftgate fuse" code on console of 2004 GMC Yukon. Liftgate will not lock. Replace the ECC 10ma fuse on the driver's side fuse panel. This happens to me

...is, you need to have the error code(s) read. Try any mechanic... or many auto parts stores will check the codes for free. From there the codes can be interpreted and a course of action

...error meassge, Thanks If you are using a DVD player in a different country to the one you purchased it in, then you may have issues reading a disk from a different zone.There is a region code on this ...

...it will reset the error code. I had that same problem and it was the crankshaft sensor, and it's not easy to change (starter has to come out as the oil dip stick). About $ 50.00 if you do

...on ALL vehicles. it covers wiring diagrams, electrical diagrams, fuse diagram, torque specs, PCV, error codes, fault codes, service info, repair info, parts info, ...

Error Codes pulles last week. Cleaned the MAF, CEL went off and back on a couple times and now is on again. When engine cold, tends to stutter & RPM's drop under 500. Better after it warms up, but

error code read via the OBD2 plug. The dealer can do it of course. And many parts stores, such as AutoZone will scan for codes for free. The code will give you a clue to the problem. Until the problem

...Yukon XL and the "Service Stability" message came on AND STAYS ON. Also accompanying the error message are two idiot lights ABS (Brakes) and T/C (Traction Control). I checked brake fluid ...

error codes po172 and po300. What do these indicate is wrong and where the problem may be?? p0300 is code for miltible misfires. The p0172 is code for a rich reading from engine bank #1, this code may