2004 GMC Yukon "abs wheel speed sensors" Questions

...wheel hub. Inspect the ABS sensor in the front wheel hub, your going to have one in each side so inspect both of them. Common for the sensors to pick up dirt giving faulty signal or no signal at all ...

...wheel is trying to lock up and cause skidding. The ABS will release the hydraulic pressure to the brake on that wheel and the traction control will reduce engine speed to prevent the wheel from ...

...ABS sensor Sounds like a "WSS" (wheel speed sensor) problem. Each wheel has one. Located on the backside of each hub, between the brake disc and hub bearing. Check for loose connector first. Wire ...

...ABS light to go on, and probably the most common is the connection to one of the four wheel speed sensors, or bad sensors. On most GMs, the sensor and wheel bearing are one assembly. First, you need ...

abs llight on? where can i find part to repair abs light? its prob. a wheel speed sensor need the codes

...abs system is the same as a record turntable placed on it's side and located behind your wheel(s) behind your brake drum(s) On the edge of this turntable (disk) a series of squares or, stroboscopic ...

...light. i was told it's the t/c sensor.what do you think? you will need to scan the abs codes when there is an abs problem it will also turn off traction control because it can not read the wheel ...

...abs light goes on after i drive about 100 ft, i was thinking wheel speed sensor we can guess or a shop can tell you for sure. It may be a wheel sensor. If your a smoker the ashes destroy the contacts ...

a day or longer. could this be a bad sensor and where are they located on the vehicle???? Bad wheel speed sensor most likely. GOOD scan tools will read ABS codes and tell you which wheel sensor is bad

...wheel bearing as the abs speed sensor reads off of a tone ring attached to the front bearings, when the bearing gets too much play it causes the sensor to receive an eratic signal making the on board ...