2000 GMC Sonoma Extended Cab "valve cover" Questions

...VALVE COVER TAKE TWO PIECES OF CARDBOARD CUT THEM TO LENGTH OF THE HEAD INSERT ON TI THE HEAD SO U DONT SPASH OIL START TRUCK AND TURN EACH ROCKER UNTIL YOUR NOISE GOES AWAY BUT DO NOT OVER TORQUE U ...

where to put/add oil? dont know what engine you have but usually on the left valve cover (drivers side) on a V6 or on a 4cyl the valve cover or the diptick hole.

...GMC sonoma The 2.2 liter engine does not have one In the valve cover. It has one vacuum hose connected to it and a rubber grommet on the valve cover that it is inserted in. It is shaped like an

Where is the PCV valve on a 1997 GMC Sonoma - 6 cyl/automatic On most 4.3 engines the PCV valve is in one of the valve covers.

...valve cover, have someone try to start the truck and watch for movement. If the engine turns and the valves don't move, you need a new chain. If you're going to let the truck sit outside before ...

...cover .notice roket arms was loss . will need to adjust them before i put it back together. Thier is no adjustment ! Valve lash is obtained through the use of hydraulic valve lash compensators. No ...

a mechanic to replace a oil pan gasket on a 1998 GMC Sonoma SLS, manual transmission? How about a valve cover gasket? reply to me and tell me what size engine please and is it 2 wheel or 4 wheel drive

...to be able to remove the timing cover. You will also need to remove the intake and pushrods That is for a V-6, a 4 cylinder is much easier as you just need to remove the valve cover and the cam

valve cover seals replaced and the valves set. It starts beautifully and does not "miss" when idling. The engine is in great shape and well cared for. I replaced all the brake lines,and also

...side blowing back on pipes causing it to smoke when oil is burning off pipes..2001 gmc Sonoma 2.2..help please?/ Could be valve cover gaskets. The oil sending unit will also throw out a lot of