2000 GMC Sonoma Extended Cab "transmission slips 35 mph" Questions

...transmission slips and only runs 35 mph have rebuilt one tranny and put another one in and both have done the same thing have checked all fuses, relays, changed fuel filter what is wrong or what else ...

...35-70 mph ). The speed ratio is 0.64-0.95 (the speed ratio is the engine speed divided by the transmission output speed). The engine speed is 1500-3500 RPM . The gear range is D4. The commanded gear ...

...35 mph, then again at 65 mph after high reving from 55 mph to 65 mph. Sounds like your transmission is on the fritz. Try changing the fluid and filter see if that helps. If that doesnt try a can of ...

...matter how far you push the pedal it slips at 20 to 35 mph but third and fourth gear are fine. transmission fluid level is right and clean. what is the problem? you most likely need a new ...

transmission and it still slips but always around 35MPH. Once past 35MPH the problem does not re-occur. Anyone have any advice? are you sure it's slipping and not just missing, i'd check my electrical

...35 it not shifting rigt so can this be fix or do i have to buy a transmission Check the speed sensor,(this may also control the speedometer) Or check the ovedrive cable. Whatever your problem is ,It ...

...transmission fixed but it slips into neutral now. Mechanic replaced twice. Found computer switch blown replaced that. Now it slips out of gear when going abut 20 to 35 mph. shift cable alignment is ...

...transmission pan (after draining), check for how much metal shavings are in the pan. There should be a magnet on the pan to collect shavings. If it doesn't look like too much, you could proceed with ...

The transmission seems to hesitate or slip at 35/40 mph before shifting? Common on the Jeep Liberty, make sure you do a trans. service and use the proper transmission fluid.

35 and 50 mph on the interstate (just started tonight driving home from work). what could possibly be wrong with it now, other than its a 93? The transmission is slipping. Try having the tarns flushed