1999 GMC Suburban "replace blower actuator motors" Questions

...Replace the blower blend door actuator ...

...blower motor, ac still wont cool vehicle off sufficientally, when you come to stop the ac will blow warm air then u either have a air temperature control blend door actuator problem or the system is ...

blower motor. I would first replace the resistor, this should get the different speeds to work and you can return the part if it doesn't work. Replacing the actuator motor takes a lot more time and so

...Blower Motor speed Position the air temperature actuator Position the mode actuator Position the re circulation actuator Request A/C operation When the warmest position is selected in automatic ...

...replace the blend (heat/cold) door motor, you can try to remove motor and turn door and try to jam something in door handle slot ,that the part that the motor turns,hope this helps. Control System ...

...be bad,it is hard to get to,unless you are mechanically inclined,You can do it your self.If the blower motor is bad,just replace it.Check fuses first,and the blower relay.If I can help,let me

...blower motor power module and the rear mode door actuator Body wire harness bracket from the console support bracket Eight screws and the two console support brackets from the floor console base and ...

REPLACE.IF BLOWER MOTOR RUNS.YOU COULD HAVE PROBLEMS IN THE BLEND AIR DOOR ACTUATOR.WARNING IF YOU HAVE TO REPLACE FRONT BLOWER MOTOR YOU NEED TO DISABLE AIRBAG SYSTEM BEFORE WORKING AROUND INSTRUMENT

...to replace the pig tail connector for the blower resistor. The contacts corrode/burn and will take out the new resistor. The actuator motor needs to be cycled through all modes to "learn" where it

Blower Motor Resistor Diagnostics by Wells Do you know how to do automotive electrical testing ? Have a volt meter ? Know how to use a volt meter ? Videos on youtube . Air Temperature Actuator The air