1998 GMC Jimmy "vacuum lines" Questions

Ad

...vacuum lines and look for any damaged lines throughout your jimmy and replace any damage lines. Poor vacuum will cause the issues your have described and the other thing also that has been found is ...

Ad

Question about GMC Jimmy

5 Answers

...the air filter? Also check any leak even the slightest leak can affect. Overheating also affects the vacuum. You can also try flushing the lines, evaporator and condenser using flushing

Ad

...vacuum lines are either pinched or the vacuum pump is shot. try getting a mechanic look at the lines on and around your transfer case... also try checking the fuses for the 4wd selector. let me know ...

Need 95 gmc jimmy vacuum diagram. I have a loose Need 95 gmc jimmy vacuum line diagram. I have a loose vacuum line that appears to be routed behind the distributor cap area, firewall?? THat goes to ...

...vacuum lines. Any idead Still sounds like a vacuum problem - not enough vacuum to hold the solenoid in. You could try directly applying a good vacuum source (either connecting to a good line on the ...

ca/heater controls **** in vent mode ac controls stuck in vent mode. no vacuum to control head. where does vacuum line tap into under the hood? Comment by schochiometr, posted on Aug 24, 2008 No ...

Question about GMC Jimmy

1 Answer

...When I turn on the max a/c, it blows out the defrost and floor vents only. It's most likely a vacuum line, look under your hood (close to the cowl panel) for a disconnected, cracked or broken ...

Question about GMC Jimmy

1 Answer

...vacuum lines are all good.They go to the actuator which is located under the battery box.The vacuum switch is just a plunger type.You can remove it with a 7/8 wrench I believe.You should be able to ...

Question about GMC Jimmy

1 Answer

vacuum lines and air mixer door valve for operation and leaks. That is all vacuum controlled and a leak on any of it will cause the blend door not to function correctly giving you this problem. If you

Question about GMC Jimmy

1 Answer

...vacuum lines for loose connections, rotted rubber, etc. There is one line that goes to a vacuum operate actuator under the battery. You will have to remove the battery tray and battery to get to it. ...

Not finding what you are looking for?
1998 GMC Jimmy Logo

1,590 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 GMC Jimmy
2000 GMC Jimmy

1,363 Questions

1997 GMC Jimmy
1997 GMC Jimmy

1,123 Questions

1999 GMC Jimmy
1999 GMC Jimmy

1,104 Questions

2001 GMC Jimmy
2001 GMC Jimmy

838 Questions

1996 GMC Jimmy
1996 GMC Jimmy

768 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...