1998 GMC Jimmy "destoryed" Questions

Ad

Question about GMC Jimmy

1 Answer

rear disk rotor wont come off yep ok you can put the vehicle back together and drive with the parking brake applied swing the vehicle left to right to wear the rust ridge off works most times what we

Ad

Question about GMC Jimmy

1 Answer

Where is the fuel pump? the fuel pump is located inside of the gas tank, to repair/replacr it disconnect all lines and electrical connectors, remove exhaust system and lower gas tank remove ring on ...

Ad

I lose heat and temperature at highway speeds in my 1998 toyota camry This is caused by a defective engine coolant temperature control thermostat. Hi sounds like the thermostat is jammed open, get it ...

i want to turn my fule up on my 02 cummings diesel what do i have to do? this is a dealer only request , enless you have a friend that has the nessary computer programs to preform the task , if you do

Question about GMC Jimmy

1 Answer

Front bushing problem While tightening the bolt for the front bushing on the sway bar on my Jeep Cherokee the nut inside the frame seems to have broken loose. I can't get the bolt in or out. Just spot

My buddy was messing with my boost ajuster and now my turbo glows red hot y I guess he has it spinning at higher rate for more boost to intake. Unless you are an experienced tuner you should never ...

Question about GMC Jimmy

2 Answers

won't start Van won't start, makes clicking noise even without key in ignition, the alarm system light inside the van is blinking. The buzzing/static sound we hear coming from the van is coming from ...

How do I remove driverside inside door panel ? I have removed screw behind door opening handle and srew behind armrest. How do I get the door panel off? door panel is holding by dozen plastic push ...

Question about Honda Cars & Trucks

1 Answer

bent valves timing belt snapped does it bend the valves and is it expensive no car stated no year, stated no engine options stated no answers (but many are) honda. is it expensive?, H3LL i dont know, ...

...trans, there should be a plastic "bushing" between the shfter and the shifting rod, its probably destoryed thats why reverse is hard to get, it adds more "throw" moving the shift rod of the trans ...

Not finding what you are looking for?
1998 GMC Jimmy Logo

1,590 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 GMC Jimmy
2000 GMC Jimmy

1,363 Questions

1997 GMC Jimmy
1997 GMC Jimmy

1,123 Questions

1999 GMC Jimmy
1999 GMC Jimmy

1,104 Questions

2001 GMC Jimmy
2001 GMC Jimmy

838 Questions

1996 GMC Jimmy
1996 GMC Jimmy

768 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...