1997 GMC Safari "change rear axle oil seal" Questions

...on the driverside and discovered a thick black oil covering everything, pads and all. what is going on here? hte rear axle seals are leaking, it will require removal of the rear end cover and the ...

...it's a lot of labor to pull everything apart to get at the seals, plus new rear brakes. My Ford ( and I'm sure your GMC) require removal of the rear axles to change the seals. Good Luck! ...

change rear whell seal 1997 f-150 gear oil comeing out of rear whell took tire off; took drum off; and saw gear oil all over brake shoes. Seal or bearing need to be replace? how? replace the axle seal

...change rear seals in axcles how to? 98 gmc jimmy First i would check to see if the axle air vent was clear if its not the oil is vary heavy and expands a lot this will build up pressure inside the ...

...change it? take off the wheel and check to see if the axle is bolted to the rear end or poss have to take off the diff cover to take the axle hold down clips off then pull out the axle pull out the ...

...rear axle seal. How do you change this seal? JACK up the truck and block other rear wheel both back and take hand brake off ,,remove rear wheel/brake drum/handbrake cable from rear brake/remove metal ...

...rear axle. axle seals were replaced with less than 100 miles drive time when noticed smoking from rear. Burning oil smell very strong, lots of smoke, oil spray around wheel/ wheel well area, when oil ...

...change the rear axleshaft oil seal Jack it up, put it on stands. Remove the wheel, the brake drum, the differential cover, the axle clip, and pull your axle. Remove and replace the seal, install new ...

rear drum (brake) is filled with grease and the smell of differential oil, on a ford f-150 (1998) 6 cylinder. how do i change the seal , bearing? it seems that i need a puller? for the axel, to get it

rear axle removal on a 2004 f150 fx4 rear axle and seal removal on a 2004 f150 fx4 First thing is to make sure you chock the front tires so the truck will not roll. Raise the rear end and set it on ...