...Remove the oil pan underbody shield. Remove the cross brace if equipped. Drain the engine oil and remove the engine oil filter. Refer to Engine Oil and Oil Filter Change Remove the lower ...
...oil from the engine Remove the 10 mm bolts holding the pan to the block. Remove the old gasket material and scrape any remaining gasket from the block and pan. Install the new gasket. Forma-Gasket or ...
...Remove the oil filter and then replace it with a brand new one. After all of the oil has drained out, tighten the bolt and the locate the oil cap and remove it. Now add five quarts of oil into the ...
...Unbolt oil pump and remove. If no oil pressure is your problem you may only need to clean out pick up tube and screen and not have to remove pump. If this is a 4x4 transfer case will be in the
need torque specs for 96 yukon 5.7 liter need the torque spec for the oil pan bolt Here's a link to the oil pan removal guide with pan bolt torque specs.
...remove your transmission oil pan which can be a messy job. You will more than likely have to remove some linkage and shields to get the pan off. Once the pan is off you should be able to see the ...
...oil pump in 2004 gmc Yukon Remove the engine oil pan then remove the screen and pump. Replace with a new screen if replacing the pump. Load the oil pump full of Vaseline so it will prime upon ...
...oil cooler off, pan just wont clear crank. do I unbolt transfer case and drop it a little or unbolt engine mounts and jack up engine? Hi, you could remove the two bolts holding the passenger side ...
Remove the oil pan skid plate from the vehicle, if equipped. 4. Place a drain pan under the vehicle. 5. Remove the power steering pressure hose from the power steering pump from underneath the vehicle
Oil pan removal from a 2000 5.3L chevy 1500 subruban 4 x 4 why? whats leaking?from where..
339 questions posted
Usually answered in minutes!
593 Questions
524 Questions
309 Questions
326 Questions
238 Questions