Question about GMC Jimmy
...distributor cap and rotor. Biggest problem is I can't find a person. manual or shop that knows anything about CPI, let alone Vortec engines. Please help me somebody!!!!!!!!!!! check the temperature ...
vortec code po300 Has anyone had a po300 code they couldn't get rid of ? I have replaced everthing related to it, dist cap, wires, plugs and distributor gear. The intake gasket was replaced as
...Distributor Ignition Systems (EDI) a simple check. If that's not the problem then remove the intake manifold. Check both the presure and return fuel lines under the manifold. More than likely they ...
Question about Chevrolet Cars & Trucks
...vortec engine for sale i bought complete motor it came out of 1998 chevy pickup ext. cab. i put that motor in my truck and some reason i just cant get it to fire yet somebody help me out here ...
Question about GMC Jimmy
...Vortec 350 getting fire to the Coil but not from it to distributor? What can be the problem? We have changed the coil and the module... How about changing the wire from the coil to the distributor, ...
...Vortec for a year or two. The distributor gear was too soft and prone to wear. Here's the proper procedure to replace: http://www.fixya.com/cars/t3398434-distributor_gear_worn_timing_retarded_15 You ...
distributor of a 1999 350 vortec is it during cool weather or warm weather . if its warm weather GM HAD A BULLITEN WHERE THE AC WAS DRIPPING CONDENSATION ON THE DISTRIBUTOR . GO TO parts house and get
Question about Cars & Trucks
vortec runs great but it stalls when i let off the throttle , has a new fuel pump, distributor, cap, rotor, idle regulator Might want to look into the TPS or throttle position sensor. I had to replace
...distributor is fine but i lost spark on my 1994 chevy k1500 with a 4.3l v6 vortec engine cannot figure it out checked everything i could think of what could be the problem? change the ignition module ...
...vortec block. I did a master gasket set, their are no vacume leaks, And it has proper compression. But when i start it, It idles around 400Rpms and when i put it under a load it dies, I tryed ...
991 questions posted
Usually answered in minutes!
1,363 Questions
1,123 Questions
1,127 Questions
1,104 Questions
838 Questions