...turn signals flasher working good. I would like to know why stop lights are not working. Did you check the brake switch adjustment. Next to and behind brake pedal arm Is the third/hi mount brakelight ...
...brake lights come on ... when brakes are applied.. the light is not bright... nor does my back up light illuminate.. but turn signals do work make sure that you have the correct bulbs installed and ...
...turn signal" clicking behind glove box There is a clicking sound coming from the glove box area of my 1998 GMC jimmy. From previous post, I have determined that this is from a defective multi switch. ...
Question about Buick Cars & Trucks
...turn signal lamp supply voltage circuits and the center high mounted stop lamp (CHMSL) supply voltage circuit illuminating the stop lamps. At the same time the BCM applies battery voltage through the ...
...turn signal lamps are also used as the stop lamps. The TURN/HAZ fuse in the instrument panel (I/P) fuse block supplies battery positive voltage to the body control module (BCM) for the turn ...
Question about Pontiac Cars & Trucks
...Turn Signal Lamp ON and OFF. The LR turn signal should turn ON and OFF when changing between the commanded states. ?‡' If the LR stop lamp does not illuminate when commanded, refer to Stop Lamps ...
...turn signal stop when I apply brake. Then Left turn signal stop when I apply brake. Then resumes clicking when I release brake pedal. when I press down on brake, left turn signal acts like a brake ...
...turn signal, Night Lights and Brake lights are inoperative. Unsure about Reverse... I replaced bulbs in both Turn and Night lights. Pretty sure that its a Wiring or ground issue, but don't ...
Question about Cars & Trucks
Turn Signal Lamps The LT T/SIG and RT T/SIG fuses located in the underhood fuse block supplies battery positive voltage to the body control module (BCM) for turn signal and hazard lamp operation. When
...good and all function normally until the brakes are on. Sounds like a faulty turn signal switch. The brake light wire is routed through the turn switch, so it appears the turn switch has gone
991 questions posted
Usually answered in minutes!
1,363 Questions
1,123 Questions
1,127 Questions
1,104 Questions
838 Questions