1995 GMC Jimmy "turn signal bulb" Questions

Ad

Question about GMC Jimmy

1 Answer

...turn signal.It keeps the battery charged when u use lights radio etc. You did not say if its one turn signal or all turn signals that dont work. It could be a bulb.One bad bulb will cause the others ...

Ad

turn on signals? if its when signals are working then check all bulbs, remove signal bulbs one at a time and make sure the correct bulb is in the socket and the bulb and socket are good, if all checks

Ad

Question about GMC Jimmy

1 Answer

...turn signal lever. Also try turning the hazards on and off slowly. All while keeping an eye on the brake lights to see if they come on momentarily. I'm pretty sure the brake and turn signal share the ...

Question about GMC Jimmy

3 Answers

turn signal does not work and all bulbs have been replaced If the arrow light on the dash flashes, this means your flasher and multifunction switch are working, and your bulb, wiring to the bulb ...

Question about GMC Jimmy

2 Answers

turn signal and get out to see if the lights are on. If there is one out it needs to be replaced. There is a possibility that it is the turn signal relay as well. This should be easily found using the

flash on the emergency flash ? Is this both turn signals ? Check the turn signal fuse then check the relays in your fuse panel. The relays are what make the ticking noise when you use the turn signals

turn signal bulb just pull out if its a flat blade type bulb or if its round gentle push in and twist counter clockwise, not sure if its frt or rear signal if it rear then open tail gate remove 2 side

...turn signal switch.Try this.push and hold brake pedal while pushing on and wiggling the hazard switch and if the brake lights come on then replace the turn signal switch. Ok? where is the turn signal ...

...turn signal won't. I replaced bulbs front and rear but they will not flash. If they come on when turned to the right but don't flash I would say flasher unit. I've seen it before. If they don't even ...

...turn signal switch in the steering column, because the brake,turn and Hazards all run through there. I take it that you already checked out your tailight circuit boards when you checked out the

Not finding what you are looking for?
1995 GMC Jimmy Logo

991 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 GMC Jimmy
2000 GMC Jimmy

1,363 Questions

1997 GMC Jimmy
1997 GMC Jimmy

1,123 Questions

1998 GMC Jimmy
1998 GMC Jimmy

1,127 Questions

1999 GMC Jimmy
1999 GMC Jimmy

1,104 Questions

2001 GMC Jimmy
2001 GMC Jimmy

838 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...