1995 GMC Jimmy "replace egr" Questions

...the EGR to opperate properly. Most will clean the EGR valve and if that does not fix the problem, check the connection to the DPF and or replace the DPF. Good luck and keep me posted. be glad to

...time turning on...Any suggestions? My 94 Jimmy had similar problems, until the dirty EGR valve was replaced. We tried a million things, first. But the improvement with the new EGR valve has HUGE. ...

...Replace the EGR valve gasket. Usually only a couple bucks. If no buildup then the plunger/float on the EGR valve could be sticking so you'll replace the valve. Usually around $50. Also check the ...

...Code 32 is Exhaust Gas Recirculation(EGR)failure. Check the vacuum source and all vacuum lines. Check the system electrical connectors at the ECM and EGR valve. Replace EGR or ECM if

...we have had cooler weather again and I am going through starting problems again. We have replaced the battery. The Egr code popped and the check engine light goes on and off. But now thats ...

1996 Gmc Jimmy Acceleration Hi, i replaced my fuel filter, fuel pump seems to work good. But when accelerating, the truck seems to putt then slowly follow through like normal. So in other words, it's ...

EGR comes up, take it off and clean it, see if that clears it up, it may be sticking. Would also clean your throttle body, and replace fuel filter. There might be a chunk of carbon stuck in the valve,

...and clean it out. If that doesn't cure the problem, then either the sensor needs replacing, and or the egr valve. it means EGR pintle position circuit malfunction. Most likely replace the EGR ...

Check engine light is on and high idle (1500rpm) Mack tool smart box brings up code P0507 idle speed high. Things I tried: Replaced Throttle positioning sensor, cleaned idle sensoring unit, and ...

...one, it did not solve the problem. I took it to my mechanic and he instantly knew what it was. He replaced the EGR valve. Fixed it. Also, a bad EGR valve can ruin a catalytic converter so you might ...