1994 GMC Jimmy "bleeding transmission jack" Questions

...jack stands and transmission in Neutral you can barely turn the wheels with no brake applied. Help?? your inside pad wore out first do to a bad caliper or frozen slide or brake hose.remove brake hose ...

...2002 if you have all tools on hand jack stands and floor jack transmission jack.plus new parts. looking at labor guide it will take 7hrs to take out put in new clutch plus bleed clutch slave

...transmission jack, under the transmission. Remove the transmission-to-engine retaining bolts and washers. Remove the nuts and bolts attaching the transmission mount and damper to the crossmember. ...

transmission, won't start at time when gear is in park position. Try jacking up car and put on stands as high as poss as you could have air returning when the pedal is returned ,so jack up car

transmission. Disconnect the drive shaft at the diff pinion and lay to one side . Place the jack under the diff housing centre and take a bit of weight. . If you have leaf springs --undo the "U" bolts

I replaced the power steering pump on my 2004 ford f150 and jacked the truck up in the air and with the cap off I turned the wheels back and forth to bleed. the steering is still tight is there a ...

transmission filter in a 2001 Isuzu Trooper Jack car up, remove drain plug and drain fluid, once it has stopped dripping, remove all the bolts around tranny pan, lower tranny pan, remove the bolt or 2

...into the transmission... There are a couple of specialty tools and hot/cold tricks that can help dis & re... assemble with minimal bleeding & damage. (I'm just saying). Carnac the ...

...transmission).  Make sure to fill up your clutch reservoir as you go along, and do not pump the clutch.  Bleeding your clutch so that no air comes out of the bleed nut when the fluid comes ...

transmission, put car up on jack stand's, then remove driver shaft, remove linkage or stick shift and all elec. connection, remove line going to slave cylinder( you'll need a line disconnect tool napa