2003 Ford Crown Victoria "brake light switch" Questions

Ad

Question about Ford Crown Victoria

1 Answer

the brake on/off switch is closed, the stop lamps light. Possible failures include the fuse, the brake on/off switch, the multi-function switch, and the filaments of the multi-purpose rear lights

Ad

Question about Ford Crown Victoria

1 Answer

...brake light switch. It should be below the brake pedal. When the brake pedal is depressed it activates the switch, which turns on the brake lights. The switch can be tested with an ohm meter or ...

Ad

Question about Ford Crown Victoria

2 Answers

brake light not working If none of the brake lights work, replace the switch on the brake pedal. You will find it by following the brake pedal lever upward. They cost around $15 at most auto parts ...

Question about Ford Crown Victoria

2 Answers

...brake light works but side brake lights do not backup lights,signals, and parking lights all work have checked fuse, relays, even brake pedal switch all good and even checked all bulbs and grounding ...

Question about Ford Crown Victoria

1 Answer

...point. Where do I go from here. Also the third brake light works along with turn signals, running lights and hazard lights. you never said if you have a good ground to the taillights, check the ...

Question about Ford Crown Victoria

1 Answer

...First check your brake light fuse, it that's ok, then you need to replace brake light switch. It's located just above brake pedal under dash. Small plastic switch w/a couple of wires from it. Easy ...

Question about Ford Crown Victoria

1 Answer

the brake lights dont light up. I just replaced the bulbz. check fuse, brake light switch, light ground. You can use a short piece of wire to jump the contacts at the switch to see if the lights go on

Question about Ford Crown Victoria

1 Answer

...brake light works, bottome two do not work. I put new bulbs, new sl switch,and checked all fuses, but bottom brake lights are still not working, there are a green, brown, and black wire running into ...

Question about Ford Crown Victoria

1 Answer

...brake light will not luminate, but; Blinkers work. Had problems previously before "no brake lights" of them staying on after trip and shut off of vehicle. Check the fuses, and check the brake light ...

brake light fuses. Does fine until I use cruise control then blows fuse. Still has parking lights and signals but no brake lights. Has happened repeatedly. Now I don't use cruise control so I can have

Not finding what you are looking for?
2003 Ford Crown Victoria Logo

751 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...