1996 Dodge Grand Caravan "replace pvc value" Questions

...pvc valve keeps clogging up, have changed 3 times. what causes this and how do i solve the problem? IT IS CAUSED BY ENGINE BLOWBY(COMPRESSION GETTING PAST THE PISTION RINGS)KEEP CHANGING THE PCV ...

...replace pvc value but i don't know where it is located It should be going to your valve cover. NOTE: On VIN K applications, the Manifold Absolute Pressure (MAP) sensor is mounted to the Positive ...

...PVC Value and were is it located? The pcv is on the drivers side valve cover. It's an orifice type system and only needs to be checked for blockage which usually don't happen. If you can see through ...

failed hydrocarbon test Change oil $20, check and clean or replace EGR value $50 and replace PVC value $10, replace air filter $15. If still fails may need new catalytic converter $200.

how to replace pcv value change pvc value its very easy. just pull the old one out, pull it off the hose and reinstall it in the reverse order.

my protege is acting up and i dont know what is wrong with it it will start but wont idle i just replaced the rod bearings and put it back in and now it wont idle at all what the hell is going on no ...

...pvc hose on a 99 ford explorer [email protected] U have v8 ? PCV is located ,drivers side rear totally to rear and down of value cover , behind the head , use mirrors to see black hoses! Use caution ...

...replace you PVC value Blown head gaskets and cracked blocks allow water to escape from the coolant system into the bores and then into the sump. The mix of oil and water produces mayonaisse or salad ...

...ignition timing or replace your fuel filter and the pvc valve and the air filter. Have you done to tune up your car? if not, tune up your car. If you done all of these you will see the different. ...

...PVC value And gasket replaced. Now the car is jerking randomly feels all most as if it wants to stall really do not know what is going on HELP PLZ You may need transmission serviced. Goto Midas, I ...