...are the same shape and size, then it is just a matter with a tester light running it from the column to the sockets and finding the break. Hope this helps Tim you need to replace the signal ...
...flasher on a 1990 pontiac bonneville? my turn signals are not working on my 1990 Pontiac Bonneville but the hazard lights and brake lights are perfectly fine, which let me to believe it was the ...
signal light flasher but cant fine where it is located please help me Your turn signal flasher should be located under the dash on just to the right hand side of the steering column. It we most likely
...signal light flasher under the dash, just forward of your right knee when you're sitting in the driver's seat. You first need to remove the 10mm bolts and 3 screws that secure the cover. There should ...
Question about Chevrolet Silverado
...signal & w a test light, test the connector on the fuse box for voltage. Jump the connector to see if the light activates. If so replace the flasher. If u don't want to test just replace the ...
Question about GMC Cars & Trucks
...light you can probe from the light for power. If there isn't anything at the connector at the light move up to the splitter. If you have a signal there your problem is between it and the tail
...light bulbs in both sides are have bad filaments. Turn on ignition key (but don't start engine). Then turn on parking lamps (first detent or "click" on headlamp switch). Walk around car and look for ...
I have no turn signals. The 4 ways work running lights work and brake lights work but not the turn signals Check the flasher that is located under the dash, sometimes there on the fuse box.
Question about Chevrolet Silverado
the electrial power get from the battery to each signal light? does anybody have a electrial diagram? If fuses are good, I would check the flasher. Located under driverside dash by the steering column
Question about Cars & Trucks
...Relay Located On My 1990 Loyale. Left Front Signal Light Not Working. But The Rear Is Flashing Fast. You have a burnt out bulb. If the flasher relay was the issue you would have no turns at
886 questions posted
Usually answered in minutes!
1,100 Questions
795 Questions
393 Questions
396 Questions
296 Questions