...Remove the fan shroud from the radiator by lifting the shroud and pushing inward. To Install: Attach shroud to the radiator. Torque the bolts to 21 ft-lb (28 Nm). Use a J 46406 fan clutch remover and ...
...remove fan shroud on radiator(transmission cooler lines may need to be disconnected and slide off the fan clutch harness on the RH side). 3.loosen fan bolts on fan clutch. 4. use fan clutch tool to ...
...remove the bolts retaining the fan blade to the fan clutch * Seperate the blade from the clutch **Important note** While you have everthing out check your belt for excessive wear. Easier to install ...
...remove fan clutch to shroud bolts 4ea 13mm. Using a fan clutch tool loosen the big fan clutch nut, take off. Then loosen the waterpump pulley bolts 4ea 12mm. Next, click the transmission lines out of ...
Remove the harness from the plastic guide while feeding the wires out of the slot. 4. Before installing the new harness, wrap the affected area on the wires with electrical tape to keep the protective
...Remove or disconnect the following: NOTE For the hoses on some engines, removal may be easier if the hose is left attached until the pump is free from the block. Once the pump is removed from the ...
...an easy fix. sounds like the idler pulley i have changed lots of them remove the belt spin the idler pulley just to confirm remove the 15mm bolt remove the pulley install a new pulley and ...
...remove fan clutch to shroud bolts 4ea 13mm. Using a fan clutch tool loosen the big fan clutch nut, take off. Then loosen the waterpump pulley bolts 4ea 12mm. Next, click the transmission lines out of ...
3,943 questions posted
Usually answered in minutes!
3,219 Questions
1,576 Questions
1,050 Questions
976 Questions
217 Questions