...loose in the tailgate so when the sprayer button is pressed fluid is squarted inside the tailgate. How do you repair this? I think the interior panel on the tailgate has to be removed to access the ...
...tailgate It should work like this: Let the gate down, take the 2 cables loose from the top, lift the gate a little and tilt it out on the drivers side. The hinge at the bottom left is slotted. When ...
...tailgate and the radio will not stay on after the car is turned off. Sometimes this will last a couple a minutes to a couple of weeks. Often it will stop working for brief times during the same day. ...
...tailgate latch works fine. The rear glass lever moves, but the latch stil will not release and open. Ideas? If I reach into the gap along the glass, I can actually feel the U-bar and the latch around ...
Question about Chevrolet TrailBlazer
...tailgate latch fasteners are loose. I have a fibreglass tonneau cover installed, but the cover's tailgate fasteners holding the latch are loose. How do I take apart the tailgate to get at the ...
Question about Chevrolet TrailBlazer
...besides pulling the latch? You may have to pull the latch, the latches inside the tailgate got loose or the tailgate is bent inward take a sluge hammer and hit it on the oppisite side to make
Question about Cars & Trucks
...loose connections. If none of these steps help to fix the issue with your tailgate, it's possible that there is a more serious problem with the tailgate itself. In this case, it's best to consult a ...
Question about Chevrolet TrailBlazer
...anything? Unscrew the two screws holding the handle on the bottom of the tailgate, then using a long screwdriver pry the clips loose on the inside holding the panel on. Replace in the same
Question about Chevrolet TrailBlazer
...tailgate is prevented from closing with a pad over the lock and tied to the retaining eyes inside. maybe loose wiper or similar? Rattles are a labor intensive job, I use a tube ( rolled paper to ...
...tailgate handle to the locks have come loose from the handle itself, and will need to be reattached. Not too difficult of a job - might need to remove the handle mounting bolts on the bed-side of the ...
3,943 questions posted
Usually answered in minutes!
3,219 Questions
1,576 Questions
1,050 Questions
976 Questions
217 Questions