intake manifold gasket replacement? radiator has a Is it hard to replace the intake manifold gasket? nah its pretty simple for the upper intake. 10 to 12 bolts.
...intake manifold. The 4.3 and most chevy engines have a problem with the intake manifold gaskets if you are over heating then likely the intake manifold gasket is leaking you should check your engine ...
...intake manifold gasket will be the problem. This is a high failure rate item and GM has redesigned the gasket a couple times in an attempt to correct it. Currenty Napa has the best replacement gasket ...
...intake manifold gasket failure. Your going to have to get that addressed soon as possible, the coolant is corrosive to the engines internal bearing and if left to mix with your oil to long will cause ...
intake manifold gasket failure I've had the intake manifold gasket fail on two Blazers now, a 2001 & now my 2002. The 2002 was replaced with a more 'hardy' gasket and I was
...what is the problem. blown head gasket or cracked head and maybe just maybe if your lucky the intake manifold gasket is just leaking have same vehicle, intake gasket was blown under ac ...
intake manifold leaking try replacing the intake manifold gasket... it will be a big help
...intake manifold gasket leaking..not a real big expense if its just a few gaskets, may be a freeze out plug, these get a bit expensive especially if its one that faces against the firewall (engine may ...
intake manifold 1996 Blazer S10 Someone replaced intake manifold gasket and put manifold on backwards so now you have to remove the breather to fill the oil. Is runs but is it okay to drive? do you ...
...intake manifold gasket; 4.3L V-6 Is there anything special gasket material &/or sealant that's needed to properly seal the intake manifold gasket? Meaning, any specific locations on the ...
1,165 questions posted
Usually answered in minutes!
2,307 Questions
1,793 Questions
1,647 Questions
1,619 Questions
1,503 Questions
