2002 Chevrolet Blazer "bleed brakes goes floor" Questions

Ad

Question about Chevrolet Blazer

1 Answer

...bad the pedal goes to the floor causing no brakes.....try replacing that.....also a vacuum leak could cause that....are you loosing brake fluid at all besides when you bleed the brakes? let me ...

Ad

Question about Chevrolet Blazer

1 Answer

...goes to floor Pulled into parking spot,brake pedal went to floor. Replaced master cylinder,still goes to floor after bleeding all wheels. I have experienced a similar situation . I finally found it ...

Ad

...bleed the rear brakes too for the air to pass. If the fluid spits solid and the pedal still goes to the floor I strongly suggest that you have the hydrovac be replaced. This is the last thing to ...

Question about Chevrolet Blazer

1 Answer

...petal goes to floor, replaced master cyl Did you bleed the brake system after replacing the master cyl? If not this could be the biggest part of your problem. So bleed your system see if that

Question about Chevrolet Blazer

1 Answer

Bleed brakes again? bleed the brake again. if the pedal goes to the floor with little resistance, then the master cylinder is your problem. the shim is to depress the noise when you applied the brake.

Question about Chevrolet Blazer

1 Answer

...bleed all brakes and all good, then random turn or out of the blue no peddle... goes to floor. It sounds like you have a faulty Electro-Hydraulic Control Unit (EHCU) or a Brake Pressure Modulator ...

Question about Chevrolet Blazer

2 Answers

...brakes seems like good pressure but when I start truck pedal goes to floor You have air in the lines, you need a dealer to bleed this as it has anti lock and that requires a special tool. You just ...

...goes to the floor, that is not good. Sometimes, when pumping brakes for bleeding purposes, the master cylinder gets damaged, as the piston goes past it's normal "travel zone" and gets damged on ...

...master and bleed all wheels, still goes to floor with engine running. Will pump up with engine not running. Power booster is bad, or you didn't bench bleed the master good and it still has air in

...bleed brakes still goes to floor you need to start at the farthest rear and bleed it make sure someone is pumping and holding brake while doing this .. then move to next farthest .. then pass front ...

Not finding what you are looking for?
2002 Chevrolet Blazer Logo

1,166 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...