how to get spare tire off I got his post from Wiki Answers: The winch is probably broken and will need to be replaced. You can use a cut-off tool or an hand held angle grinder to cut the cable holding
my winch don't move it all? I install a remote control, was working before, but I not sure if this afect my winch is DC operated, 12 volts. Thanks if you can use the winch manually by pressing buttons
replacing spare tire winch 2004 chev trailblazer I've replaced the spare tire winch twice each time when I lower the cable it comes down about 1-3" then binds up or something and the plastic housing ...
...problems I have a 2010 Polaris ranger with a dealer installed warn winch.The winch will power out but not in. It had been working then just quit. how can I test winch to make sure it works or if the ...
Spare tire winch Cant get the winch to go up or down it is jamed This unfortunately is a common problem, you will have to cut the cable and replace the tire winch, luckily they are cheap.
Question about Cars & Trucks
The 12v winch on my Snowbear plow is not working up or down. I removed the cables and connected cables straight from the battery and the winch worked. Where do I look now the obvious place to work on ...
Question about Cars & Trucks
...the battery the winch seemed to work fine. Not sure if its the battery or sloenoid Start with load testing the battery or straight up replacing it. If problems continue, diagnose the charging
...drop down, comes loose and turns but does not drop down, CABLE IS FREE I suspect a problem with the winch itself not realeasing the tire down.. If this is so, I believe the spare tire needs to be cut ...
Question about Cars & Trucks
Gearmatic winch 19 on a Cat 518. Winch pulls in powerfully all the time. Lever position does nothing. Byron: On site, Captain_Crunch said: " Little band applys big band there is a toggle block at ...
...your jack and lift up your spare, holding the weight on the rim and not the bracket attached to the winch. This should free up the winch to allow movement. Then taking your flat head screw driver and ...
1,155 questions posted
Usually answered in minutes!
1,473 Questions
904 Questions
747 Questions
686 Questions
620 Questions