Question about Chevrolet S 10
...rear disc brakes, one of the rotors could be warped and causing the pads to move in the caliper. You should be able to remove one wheel at a time, lock down the rotor with the lug nuts, and put the ...
rear brakes for a chevy s-10 I can not pull the left side drum off. It is loose but it seems like the pads are still contacting it.Anyone have any ideas. I already took one side off and the top of the
...the front replaced and the rear brakes cleaned. It was initially thought I need a brake drum but when it was put on the noise did not stop. Could it be rotors on the rear of the vehicle please help ...
Question about Chevrolet S 10
...put new pads on the rear brake rotors, but I could not figure how to adjust the e-brake which now pretty much goes to the floor. I bought a Haynes manual which claimed to go up thru the 05 model. But ...
Question about Chevrolet S 10
...PADS BACK ON REAR BRAKES FOR 2005 CHEVY SILVERADO CRU CAB did you remove both sides? its fairly simple just got to remember gow you removed them first you have to compress the caliper piston install ...
...rear brakes. Pay attention to a wheel device that has ratchet. I suspect someone did a brake job and put the adjustor on backwards. Check that the return spring tension is ok and that the cylinder ...
...rear brake pads on our 98 chevy blazer, they are sticking and overheating as we drive... what did we do wrong? Did u make sure to compress the caliper fully when u put the new pads on that may be the ...
Question about Chevrolet S 10
...rear wheels. Remove front wheels, keep steering wheel unlocked so you can turn rotors side to side. Loosen bolts that hold caliper end gently pry caliper free from rotor, remove caliper and remove ...
...rear drum was put on it still made the same sound? Please help if u can. if your rotors are really shiney "glazed" it is recommended to have them turned or replaced. Is ita screaching noise or ...
...rear disk brake pads, the caliper assembly did not want to go back onto the lower bolt post, The plunger was retracted. The caliper assembly is not tight on the rotor until I tried to put the lower ...
1,155 questions posted
Usually answered in minutes!
1,473 Questions
904 Questions
747 Questions
686 Questions
620 Questions