1997 Chevrolet S-10 Pickup "keep getting error code playing" Questions

keep getting an E20 error message in the CD player because it will only play certain CDs. So I was wanting to know what E20 means and what I can do to fix it. cd error code e20 help ...2002 Grand Prix

a new battery put in my 2006 ford fushion. now the CD player wont play or release any of cd's . Its keeps showing Errors Loading can't get any of the to eject driving me madddd!!! Anti-theft on radio.

getting a code when the CEL comes on. You need to get a code reader to see what code it projects. This will give you a starting point to research the problem. Keep in mind the code may reference  

...getting this error and the disk is in fact right side up you have other problems with the unit such as the Read Write Head is dirty or damaged. Possible that something got in there inserting and ...

...error codes from the CD player/changer it means that there is a mechanical failure in the CD player/changer unit itself and it usually requires CD player/changer rebuild or replacement... First make ...

...keep getting errors when i try to play the CD do you have any info or is it time for a new system ? if so whatis the best to buy? Thanks in Advance John lyth [email protected] The trunk mounted 12 ...

...playing up, do you have any error codes? have you got the engine management light on ( looks like a picture of a car on the dash ) you could actually take it to a garage and get them to put a ...

...error code is often accompanied by a P0172 (HO2S Oxygen Sensor). So, the rational is that if the oil flow is improved - the Camshaft Actuator and HO2S Oxygen Sensor' should reset themselves - and I ...

...KEEP IT SAFE! 5. Type in the 5 digit code into your radio. This will unlock the radio and return it to a functional state. * REMOVING ERROR E3 ****If you entered too many wrong codes and got an ERROR ...

...keep an eye on the burnt fuel deposites and then sends the signal back to the ecu, which in turn then opens or closes the mixture , but if it is sending the correct signal and the MAF is not reading ...