1997 Chevrolet S-10 Pickup "gas pressure wire feed" Questions

Ad

...pressure is achived the computer shuts that circuit off and turns on the fuel pump relay to power the pump till you shut off the engine You need to get at thte wire harness near the fuel tank, this ...

Ad

Question about Chevrolet S 10

2 Answers

...gas in the carb its getting fuel right? Any help with this would be greatly appreciated! Check the spark either with an inductive timing light, or with an old spark plug in a wire you disconnect and ...

Ad

...gas The fuel pump relay is at fault. Upon starting the engine the fuel pump is feed by the engines oil pressure switch. Once the engines oil pressure is reached to operating pressure the computer ...

...gas to the cylinders If you already replaced fuel pump and filter and still no fuel pressure at injectors rail, your problem is more than likely electrical. Check for good power and ground at fuel ...

...gas tank filler had to be jumped which was easy because by looking at the wires in bulb i could trace by color the wire These should be the colors coming out of the plug on the fuel pump. ...

gas. It also cleans injectors some what. If this doesn't work move on to your fuel pressure regulator and make sure u have good injectors. Also replace fuel filter, easy to do with the purchase of

...gas line pressure relief at on my 96 pontiac grand am 2.4 there should be a port.....there in the injector rail. The module has a wire sticking out the end of it. It is on the fuel line after the ...

Question about Chevrolet S 10

1 Answer

gas tank is zero (nothing) even when hot wired the oil pressure switch is the main feed to the pump upon starting the engine. with the key set to the ON position without starting the engine you should

...gas is getting to engined but somewhere in injectors it gets lost. check around for worn or broken wires checked fuses have not checked with noid tester for the lack of not having one is there ...

...pressure at the schrader valve. if you pour a little gas in the throttle body it starts and runs for a few seconds. I'm also getting 12 volts to 6 of the 12 wires that feed the injectors. the truck ...

Not finding what you are looking for?
1997 Chevrolet S-10 Pickup Logo

1,155 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...