1997 Chevrolet S-10 Pickup "changing oil pressure gage" Questions

OIL PRESSURE IN MY 2.2 ENGINE MANUAL TRANNY OIL PRESSURE IS AT 15 WHEN I START THE ENGINE ...AFTER 20 MINUTES IT DROPS TO ZERO AND I HEAR TAPPING OR KNOCKING WHEN I PRESS THE GAS PEDAL OVER 2000 RPMS.

Oil Pressure Switch Described Below, It May Seem Silly But I Have Had Many times Replaced this On GM Vehicles Including My Own Car. The fuel pump and engine oil pressure indicator switch is mounted in

Oil pressure on my 1996 Dodge Ram pickup is running low even though my oil level is fine Oil gage have the oil pressure checked with an independent gage as sometimes gages in the dash don`t show ...

...oil pressure? btw 2004 GMC Yukon XL Denali oil change, after pressure as 80.checked it , oil levels perfect , changed again anyways. still high pressure with oil level low.today oil pressure zeroed ...

...oil pressure needle keeps marking 0. It had the same problem once but I changed the oil and kept working fine; then about 2 months after that oil change the oil pressure needle started to drop again, ...

...OIL PRESSURE AND I HAD NO OIL LIFE, TRIED TO RESET OIL LIFE TO 100%, WHICH I DID BUT ON MY DASH ITS STILL READING LOW OIL PRESSURE AND THE GAGE GOES BACK AND FORTH, PLEASE HELP ME.. you either have a ...

...oil pressure gauge not the oil level gauge. Sometimes they can act that way when the oil is thin. When is the last time the oil was changed? Try using a heavier weight oil. When engines wear they ...

...sender and see if the dash warning lights turn off. If after changing the oil pressure sender you still have oil pressure warning lights on, you may have to replace your oil pump in your oil

changing the oil pump out two times, amd the sensors have also been changed. You can't go by the gage on the dash, you need to hook up a manifold gage to get an accurate reading. Did you check the oil

...and it has new oil but its still registering high what is it Remove oil sender unit on engine scew in a oil pressure gage if oil pressure ok replace sending unit if not oil pump needs to be ...