1995 Chevrolet Suburban "spark plugs wires" Questions

Ad

Question about Chevrolet Suburban

1 Answer

...spark plugs on each side of the engine. The front (of the engine) plug on the drivers side, is plug #1, the front plug on the pass. side is #2, then back to driver side, next plug back is #3, back to ...

Ad

Question about Chevrolet Suburban

2 Answers

...spark plugs in order to replace the plugs. I am afraid I will damage the wire if I usr too much force. Just twist and pull. If they break replace the wires too. How many miles on the truck. It is a ...

Ad

Question about Chevrolet Suburban

1 Answer

...spark plugs and they are okay and it is getting fuel make sure you are getting spark through the sparkplug wires. a sparkplug tester is the easiest way, or take a wire off one of the plugs try ...

Question about Chevrolet Suburban

1 Answer

spark plugs Vortec Motor: I would like to learn how to pull the spark plug wires from spark plugs without any damage to the plug. There appears to be heat sheilds covering the bottom of the each plug ...

...spark plugs. Wires won't pull off, how do I get them off? Try twisting them back and forth before pulling them upward. They make a spark plug boot puller tool. But usually try twisting the boot ...

...spark plugs truck drove fine. After I changed the spark plug wires the truck runs hard and misfires Hi Eric

I would check to make sure a plug wire hasn't been crossed.
It could be a bad ...

Question about Chevrolet Suburban

1 Answer

plugs wires checked all fuses no broken wires and still no spark can anyone help Have you pulled the sparkplug wire off the #1 plug. and use a spare plug into the boot. Becareful at this point it will

To see if it was a bad a wire, I switched the spark plug wires on #6 and 8. Haven't had a problem since. I think it might have been the plug wires being re-seated when I swithced them took care of it

Question about Chevrolet Suburban

1 Answer

...and screen. getting gas but have no spark. had spark before i replaced the pump. check teh wiring plug on the ignition module and the wires in the plug havent corroded and broke inside the rubber ...

Question about Chevrolet Suburban

1 Answer

spark. If not, then the problem lies in the coils.or distributer . Check that all the wires are good and that they are inserted into the ditributer cap snug . Check cap for cracks also check the rotor

Not finding what you are looking for?
1995 Chevrolet Suburban Logo

425 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...