...starter relay on my 1994 chevrolet Suburban? Were is it, what does it look like? The starter relay is called a solenoid. On older cars the solenoid was attatched to the wheelwell or firewall inside ...
Question about Chevrolet Suburban
starter relay, ignition fuse, and other fuses in. what to do? It originally blew the ignition fuse months ago. Replaced it and its been starting just fine. Then it blew again and continued to blow the
...RELAY OR IGNITION... PLEASE HELP!! check that you have the starter wire on the solenoid correctly whne you say power to the starter --is that from the battery lead or the small control wires from the ...
Question about Chevrolet Suburban
...starts when you hook the battery cable back up with the key off any help? replace the starter relay in the engine compartment fuse box.... before you do that recheck the wiring on the starter
...starter solenoid relay into the ignition system. This fault occurs when there is not enough voltage supply to the small terminal of the solenoid on the starter motor, causing is to click and not ...
...starter relay, could this be true of this car as well? Try changing the relay first, if it still does it, change the starter, sounds like it's dragging. I have a ford that did the same thing, I ...
...starter relay in the Underhood Fuse and Relay Center. My biggest concern would be: What caused the fuse to blow in the first place? If you get nothing else from my preaching, get this: Fuses don't ...
2 to 3 seconds if the starter is not engaged. You will want to crank the engine over and check for voltage on the load side of the relay, circuit #30 at the relay. Let me know after you check. Regards
...starter doesn't run at all, but the relay clicks when the key is turned, the relay itself may be in trouble. Also, check the ground wire that runs from the battery to the engine or maybe to the car ...
starter relay located on 1989 chevy suburbani have no electrical power,my lights n radio come on but when try to start nothin happens just my battery gauge goes frm 13pwr to 0pwr..wat is wrong? Sounds
425 questions posted
Usually answered in minutes!
550 Questions
469 Questions
461 Questions
355 Questions
338 Questions